Paragraph 1 – Designed Specifically for Liquid Materials
You need a tank for liquid mixing. We are a professional equipment manufacturer. We started in 2010. Our factory covers 11,770 square meters. We have 80 employees. The Stainless Steel Liquid Mixing Tank is designed specifically for liquids. It is widely used in chemical, food, pharmaceutical, and daily chemical industries. The inner wall is very smooth for easy cleaning. From our FAQ, we support custom designs. You give us your liquid properties. We make the tank for you.
Paragraph 2 – Blade Type Matches Your Liquid Viscosity
This Stainless Steel Liquid Mixing Tank uses 304 or 316L stainless steel. The volume range is 50L to 10000L. The design pressure is atmospheric to 0.6MPa. The design temperature is -20℃ to 120℃. The shell thickness is 3-18mm. For low viscosity liquids, we use a propeller blade. For high viscosity, we use a ribbon blade. We include an inlet, an outlet, a sight glass, a level gauge, a temperature sensor, and a cleaning device. The inner surface is polished to Ra≤0.6μm. The outer surface is brushed or mirror polished. The seal is a mechanical seal.
Paragraph 3 – A Daily Chemical Company Got No Bubbles in Shampoo
A Stainless Steel Liquid Mixing Tank works for water solutions, solvents, and slurries for stirring, mixing, dissolving, and homogenizing. We once helped a daily chemical company. They needed to mix shampoo ingredients. We designed a tank with a propeller blade. The mixing was very uniform with no bubbles. The customer was very satisfied. We offer a 12-month warranty. We also accept third-party inspections.
Hot Tags: stainless steel liquid mixing tank, China stainless steel liquid mixing tank manufacturers, suppliers, emulsifying mixing tank, horizontal mixing tank, industrial agitator tank, reactor mixing tank, sanitary mixing tank, vacuum process tank
Specification Table
|
Parameter |
Description |
|
Material |
304 / 316L Stainless Steel (Optional) |
|
Volume |
50L - 10000L |
|
Design Pressure |
Atmospheric - 0.6 MPa |
|
Design Temperature |
-20℃ - 120℃ |
|
Shell Thickness |
3 - 18mm (Customized) |
|
Agitator Type |
Based on viscosity (Propeller, Paddle, Ribbon) |
|
Standard Parts |
Inlet, outlet, sight glass, level gauge, temp. sensor, cleaning device |
|
Inner Surface Finish |
Polished (Ra≤0.6μm) |
|
Outer Surface Finish |
Brushed or Mirror Polish |
|
Seal Type |
Mechanical Seal |
|
Customization |
Non-standard size, port, and power |
|
Suitable Media |
Water solutions, solvents, slurries for mixing, homogenizing |
